Product Center
retail price
Market price
weight
kg
inventory
Hidden domain element occupancy
Surface protection material for coated steel sheets. A polyolefin film was used for rapgard F101 / F202 surface protection material. This tape has good weather resistance, uniform color and good coating gloss, and is particularly suitable for coated steel sheets of automobiles.
Category：
Protecting Materials
Characteristic：
1. Good weather resistance.
2. The adhesive force is stable and long-lasting.
3. Uniform color and good coating glossiness.
characteristic:
|
Product number |
Thickness [mm] |
Adhesive strength [N/25 mm] |
|
F-101 |
0.045 |
6.0 |
|
F-202 |
0.040 |
5.0 |
Application：
Used to protect the surface of painted steel plates.
Used to protect the surface of painted steel plates：
•Before application, thoroughly check whether the tape can achieve your expected purpose. We can conduct adaptability tests according to your wishes. However, we cannot guarantee that the testing process and results will meet your needs. It is up to you to determine its adaptability.
•The characteristics and performance of the tape depend on the type of adhesive, the usage environment, and the situation/period after application. Replace the bonded object (composite/surface roughness), use the environment or conduct regular testing (including surface) before use.
•After sticking the tape onto PVC adhesive or surface active adhesive containing plasticizers (electrolysis, chemical treatment, polishing, etc.), the tape will be difficult to peel off, and over time there will be residue.
•When applying tape to display materials, special attention should be paid to testing for surface defects. The surface of display materials may have stains, cloud spots, or unevenness, depending on the type of material. If used improperly, bubbles will be generated.
•After use, if the product is stored for a long time, the above problems may also occur.
•If the product is used outdoors for a long time, the above problems may also occur. Full inspection is required before use.
•Before application, it is necessary to remove any grease, moisture, or dust from the surface of the bonded object.
•When coating after peeling off the surface protective material, it is necessary to thoroughly clean the surface, lower the surface treatment and sintering conditions, and determine the adhesion of the coating before using the product.
Previous page
