Product Center
retail price
Market price
weight
kg
inventory
Hidden domain element occupancy
Surface protective materials for colored steel plates, plastic molds, etc. SPV-3641FK2 and SPV-3643FK2 are surface protective materials for colored steel plates, nameplates, and plastic molds. These are all types of flat adhesives from the SPV-364 series.
Category：
Protecting Materials
Characteristic：
1.The change in adhesive strength after lamination is minimal, ensuring easy peelability.
2.The degree of contamination after peeling is very low.
Characteristic:
|
Product Code |
Thickness [mm] * 1 |
Adhesive strength [N/20mm] * 2 |
|
SPV-3641FK2 |
0.043 |
1.20 |
|
SPV-3643FK2 |
0.045 |
2.10 |
[Testing Method]
*1：Nominal thickness
*2：Peel angle: 90 °, peel speed: 300 mm/min
Application：
Protect the surfaces of colored steel plates, nameplates, and plastic molds during transportation and processing.
Matters needing attention：
•Avoid direct sunlight and store at room temperature and normal humidity.
•Do not press hard during use, otherwise it may cause the end of the tape to peel off.
•If used on surfaces treated with engine oil, carefully remove any oil stains from the surface. Because oil stains can cause contamination or adhesive residue on the surface of the bonded object.
•When used under extreme conditions, please conduct comprehensive testing and evaluation of the product in advance.
•After peeling off the tape, a small amount of adhesive residue may affect surface coloring, electroplating, etching, or bonding. Before application, please conduct a thorough inspection under actual conditions.
•According to the baking and other conditions of the paint layer, the painted board may make it difficult for the tape to peel off or peel off together with the paint layer. Please conduct a comprehensive evaluation in advance.
•Surface treated plates, such as acid resistant aluminum, may have different SPV (peel off) characteristics depending on the treatment conditions. Please conduct a comprehensive evaluation in advance.
•Especially when applied to natural adhesives such as marble and wood, please contact our sales representative.
•The data in the above data table are measured values under specific testing conditions and do not guarantee actual performance.
•Product quality, performance, and/or functionality may vary depending on usage conditions. Please contact our supervisory department for detailed information about the product.
•Under extreme conditions, there may be differences between the sample measurements and actual performance of the product. Considering your own safety and product performance, please conduct comprehensive testing and evaluation of the product.
•Any changes or discontinuation of this product and/or its features will not be notified in advance.
Previous page
